LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-9 V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - Differential >> Actuator >> Testing and Inspection

Actuator: Testing and Inspection

AWD SOLENOID INSPECTION





1. Disconnect the negative battery cable.
2. Disconnect the AWD solenoid connector.
3. Measure resistance between AWD solenoid connector terminals A and B.
^ If the resistance is not within the specification, replace the coupling unit.

AWD solenoid resistance 1.5 - 2.0 ohms
(Rear differential oil temperature at 20° C (68° F))

4. Connect the AWD solenoid connector.
5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals