LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-9 V6-3.5L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Headlamp Alignment Switch >> Service and Repair

Headlamp Alignment Switch: Service and Repair

HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover. (Driver side)
3. Remove the hood release lever.




4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals