LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-9 V6-3.5L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - HVAC >> Evaporator Temperature Sensor / Switch >> Testing and Inspection >> Rear

Rear

REAR EVAPORATOR TEMPERATURE SENSOR INSPECTION
1. Measure the temperature at the blower inlet.




2. Measure the resistance between the rear evaporator temperature sensor terminals.
- If the resistance is not as shown in the graph, replace the rear evaporator temperature sensor.
scientia non olet · About LEMON Manuals