LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-9 V6-3.5L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Trunk / Liftgate Switch >> Service and Repair >> Power Liftgate (PLG) Front Switch Removal/Installation

Power Liftgate (PLG) Front Switch Removal/Installation

POWER LIFTGATE (PLG) FRONT SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the dashboard under cover. (Driver's side)
3. Remove the hood release lever.
4. Remove in the order indicated in the table.






5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals