LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-9 V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft Bearing >> Specifications

Camshaft Bearing: Specifications

Camshaft Bearing Cap

Right Hand





Install the RH bank camshaft caps and temporarily tighten the camshaft cap bolts evenly in the order shown in several passes.
Tightening torque 8.5-11.5 Nm (87-117 kgf-cm, 76-101 in-lbf)

Left Hand





Install the LH bank camshaft caps and temporarily tighten the camshaft cap bolts evenly in the order shown in several passes.
Tightening torque 8.5-11.5 Nm (87-117 kgf-cm, 76-101 in-lbf)
scientia non olet · About LEMON Manuals