LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission [Service, Removal & Installation 5R44E/5R55E]) >> Automatic Transmission Cooler Tubes Removal / Installation >> Removal

Automatic Transmission Cooler Tubes Removal / Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING
  2. Disconnect the transmission fluid cooler inlet and outlet tubes from the radiator.
  3. Disconnect the fluid cooler inlet and outlet tubes from the transmission.
  4. Remove the transmission fluid cooler tube bracket and the transmission fluid cooler inlet and outlet tubes from the engine.
scientia non olet · About LEMON Manuals