LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission [Service, Removal & Installation 5R44E/5R55E]) >> Automatic Transmission Components >> Geartrain >> Output Shaft

Output Shaft

WARNING: This page is about a different variant/trim than selected.

The output shaft is supported by a bearing in the case and by the slip yoke bushing in the extension housing. End positioning is controlled by the parking pawl gear and snap ring shoulder and by the reverse ring gear hub and snap ring.

scientia non olet · About LEMON Manuals