LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - Self-Diagnostics) >> Drive Cycle Procedures >> Monitor Repair Verification Drive Cycles >> Fuel Or Misfire Monitor Repair Verification Drive Cycle

Fuel Or Misfire Monitor Repair Verification Drive Cycle

WARNING: This page is about a different car, the 2003 Mazda B4000, 2003 Mazda B3000, and 2003 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Ensure Vehicle Preparation has been performed. Accelerate on an expressway to 65 MPH. Coast down with foot off accelerator pedal (no brakes) from 65 MPH to 40 MPH. Repeat this procedure 3 consecutive times. After repeating this procedure 3 times, verify no DTCs are set with the exception of DTC P1000.