Connect (Vacuum Tube Fitting - Pinch Release)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fitting and the tube for damage.
Remove any dirt or obstructions.
Push the tube into the fitting until it snaps in place.
Pull on the connection to make sure the fitting is secure. See Fig 1.

Fig 1: Installing Vacuum Tube Into Fitting - Pinch Release

Courtesy of MAZDA MOTORS CORP.