LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 559 (Engine Mechanical [Intake-Air System)) >> Accelerator Pedal Removal / Installation - 3.0L

Accelerator Pedal Removal / Installation - 3.0L

WARNING: This page is about a different car, the 2007 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator cable from the accelerator pedal and shaft.
    Fig 1: Disconnecting Accelerator Cable From Accelerator Pedal And Shaft
    G04929925Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolt and remove the accelerator pedal and shaft.
  3. To install, reverse the removal procedure.
Fig 2: Accelerator Pedal Bolt With Torque Specification
G04929926Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals