LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 558 (Engine Mechanical [Service Information 3.0L]) >> Flywheel Removal / Installation - 3.0L >> Removal

Flywheel Removal / Installation - 3.0L: Removal

WARNING: This page is about a different car, the 2007 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch. See CLUTCH DISC AND COVER REMOVAL / INSTALLATION .
  2. Remove the flywheel bolts.
    Fig 1: Locating Flywheel Bolts
    G04929493Courtesy of MAZDA MOTORS CORP.
  3. Remove the flywheel.
  4. Clean and inspect the flywheel. See FLYWHEEL INSPECTION .
scientia non olet · About LEMON Manuals