LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 558 (Engine Mechanical [Service Information 3.0L]) >> FLEXPLATE Removal / Installation - 3.0L >> Installation

FLEXPLATE Removal / Installation - 3.0L: Installation

WARNING: This page is about a different car, the 2007 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Special bolts are used for installation; do not use standard bolts.
  1. Position the flexplate on the crankshaft and install the bolts.
    Fig 1: Flywheel Bolts With Torque Specifications
    G04929494Courtesy of MAZDA MOTORS CORP.
    • Tighten the bolts in a criss-cross pattern.
  2. Install the transmission. See AUTOMATIC TRANSMISSION REMOVAL / INSTALLATION , .
scientia non olet · About LEMON Manuals