LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 558 (Engine Mechanical [Service Information 3.0L]) >> Drive Belt Removal / Installation - 3.0L

Drive Belt Removal / Installation - 3.0L

WARNING: This page is about a different car, the 2007 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the accessory drive belt tensioner counter-clockwise and remove the drive belt.
  2. To install, reverse the removal procedure. See DRIVE BELT INSPECTION - 3.0L , for correct accessory drive belt routing.
scientia non olet · About LEMON Manuals