LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Engine - Intake-Air System) >> Accelerator Pedal Removal / Installation - 2.3L

Accelerator Pedal Removal / Installation - 2.3L

WARNING: This page is about a different car, the 2007 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting Accelerator Cable From Accelerator Pedal And Shaft
G04929876Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the accelerator cable from the accelerator pedal and shaft.
    Fig 2: Locating Accelerator Pedal Bolt With Torque Specification
    G04929877Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolt and remove the accelerator pedal and shaft.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals