LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Engine Mechanical 2.3L Service Information) >> Crankshaft Front Oil Seal Removal / Installation - 2.3L >> Installation Note

Installation Note

WARNING: This page is about a different car, the 2007 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Lubricate the oil seal with clean engine oil.
  1. Using the crankshaft front oil seal installer SST  , install the crankshaft front oil seal.
    Fig 1: Installing Crankshaft Front Oil Seal
    G04929148Courtesy of MAZDA MOTORS CORP.
  2. Install the crankshaft pulley. See CRANKSHAFT PULLEY REMOVAL / INSTALLATION - 2.3L , .
scientia non olet · About LEMON Manuals