LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Engine Mechanical 2.3L Service Information) >> Belt TENSIONER Removal / Installation - 2.3L

Belt TENSIONER Removal / Installation - 2.3L

WARNING: This page is about a different car, the 2007 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. See DRIVE BELT REMOVAL / INSTALLATION - 2.3L ,
    Fig 1: Belt Tensioner Bolt With Torque Specification
    G04929112Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolt and the belt tensioner.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals