LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Engine Mechanical 2.3L Service Information) >> Belt Idler Pulley Removal / Installation - 2.3L

Belt Idler Pulley Removal / Installation - 2.3L

WARNING: This page is about a different car, the 2007 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. See DRIVE BELT REMOVAL / INSTALLATION - 2.3L ,
    Fig 1: Belt Idler Pulley Bolt With Torque Specification
    G04929113Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolt and the belt idler pulley.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals