Engine Oil Replacement - 2.3L

WARNING: This page is about a different car, the 2007 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Warm up the engine to normal operating temperature.
Remove the oil filler cap and oil drain plug.
Drain the oil into a suitable container.
Install a new gasket and the drain plug.
Tightening torque

28 Nm {2.9 kgf.m, 21 ft.lbf}
Refill the engine with the specified type and amount of engine oil.

ENGINE OIL CAPACITY

Procedure	Liters (US qt., Imp. qt.)
Engine oil replacement (with oil filter)	3.8 {4.0, 3.4}
Engine oil replacement (without oil filter)	3.3 {3.5, 3.0}