LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Automatic Transaxle - Overhaul [FN4A-El]) >> Component Disassembly & Reassembly >> Front Internal Gear & One-Way Clutch >> Front Internal Gear & One-Way Clutch Preinspection

Front Internal Gear & One-Way Clutch Preinspection

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2005 Mazda 6, 2005 Mazda 3, 2004 Mazda 6, 2004 Mazda 3, and 2003 Mazda Protege5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set front internal gear and one-way clutch component to the one-way clutch inner race. Verify that the one-way clutch rotates smoothly when turned counterclockwise and locks when turned clockwise. See Figure.
  2. If one-way clutch does not operate as specified, replace as necessary.
scientia non olet · About LEMON Manuals