Cylinder Block Specifications
WARNING: This page is about a different car, the 2007 Mazda B3000, 2006 Mazda B3000, 2005 Mazda B3000, 2004 Mazda B3000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Head Gasket Surface Flatness | 0.08 mm (0.003 In.) in 152.0 mm (6.00 In.) | |
| Head Gasket Surface Finish (RMS) | 1.0-3.3 Micrometers | |
| Cylinder Bore | ||
| Diameter | 89.00 mm (3.504 In.) | |
| Surface Finish (RMS) | 0.45-0.96 | |
| Out-of-Round Limit | 0.025 mm (0.001 In.) | |
| Out-of-Round Service Limit | 0.050 mm (0.002 In.) | |
| Taper Service Limit | 0.050 mm (0.002 In.) | |
| Main Bearing Bore Diameter | 68.905 mm (2.713 In.) 68.885 mm (2.712 In.) | |