Connecting Rod Cleaning
WARNING: This page is about a different car, the 2007 Mazda B3000, 2006 Mazda B3000, 2005 Mazda B3000, 2004 Mazda B3000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not use a caustic cleaning solution or damage to the connecting rods may occur.
NOTE:
- If the connecting rod large end is mechanically split or cracked to produce a unique parting face, a locking joint is produced. Parts are not interchangeable.
- Mark and separate the parts and clean with solvent. Clean the oil passages.