LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Knock Sensor >> Removal & Installation (B2300, B3000, B4000, MPV & Tribute)

Removal & Installation (B2300, B3000, B4000, MPV & Tribute)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Knock Sensor (KS) is located on right side of engine block. Disconnect KS harness connector and remove from mounting bracket. Remove bolt (nut on Tribute 2.0L) and KS. To install reverse removal procedure.

scientia non olet · About LEMON Manuals