Removal & Installation (B3000, B4000, Millenia, Protege 2.0L, Tribute 3.0L & 626)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Sensor is located on front of engine, near crankshaft pulley. Remove engine undercover. Disconnect wiring connector. Remove sensor bolts and sensor. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .