LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Throttle Body >> Removal & Installation (B2300, B2500, B3000 & B4000)

Removal & Installation (B2300, B2500, B3000 & B4000)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect throttle position sensor electrical connector. Remove snow/ice shield (if equipped) to expose throttle linkage. Remove throttle cable bracket.
  2. Disconnect cable from ball stud on throttle body. Remove air cleaner-to-throttle body air inlet tube. Disconnect canister purge hose from fitting beneath throttle body.
  3. Remove 4 throttle body bolts. Remove throttle body from upper intake manifold. Install NEW throttle body gasket. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals