LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Mechanical) >> Removal & Installation >> Front Crankshaft Oil Seal >> Installation

Front Crankshaft Oil Seal: Installation

WARNING: This page is about a different car, the 2002 Mazda B3000 and 2001 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate lip of seal with clean engine oil. Using a proper size seal installer, install seal. Lubricate damper seal surface with engine oil. Apply RTV sealer onto damper keyway. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals