LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine Mechanical - 3.0L) >> Exhaust Manifold To Exhaust Gas RECIRCULATION (EGR) Valve Tube >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the EGR tube nut at the manifold connector.
    Fig 1: Disconnecting EGR Tube Nut
    G01150940Courtesy of MAZDA MOTORS CORP.
  2. Carefully remove the differential pressure feedback EGR sensor from the EGR tube.
    Fig 2: Disconnecting Differential Pressure Feedback EGR Sensor
    G01150941Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the EGR tube fitting and remove the EGR tube.
    Fig 3: Disconnecting EGR Tube Fitting
    G01150942Courtesy of MAZDA MOTORS CORP.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals