LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine Mechanical - 3.0L) >> Accessory Drive Belt - 3.0L DURATEC (4V) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right front wheel and tire.
  2. Remove the bolts and the right front lower splash shield.
    Fig 1: Removing Right Front Lower Splash Shield
    G01151654Courtesy of MAZDA MOTORS CORP.
  3. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.
    Fig 2: Rotating Accessory Drive Belt Tensioner Clockwise
    G01151655Courtesy of MAZDA MOTORS CORP.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals