LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft (3.0L) >> Disassembly >> Bearing & Dust Seal (Axle Shaft Side) Disassembly Note

Bearing & Dust Seal (Axle Shaft Side) Disassembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bearing using the Bearing Installer (49-H025-001), Handle (49-G030-797) and Support Block (49-G026-103) and a press. See Fig 1 .

Fig 1: Reassembling Bearing & Dust Seal
G00318695Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals