LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical [Service Information 4.0L] >> Valve Tappet Removal / Installation - 4.0L

Valve Tappet Removal / Installation - 4.0L

  1. Remove the valve covers. See VALVE COVER - RH REMOVAL / INSTALLATION - 4.0L , or VALVE COVER - LH REMOVAL / INSTALLATION - 4.0L , .
  2. Remove the fuel supply manifold. See FUEL INJECTION SUPPLY MANIFOLD AND FUEL INJECTOR - 4.0L REMOVAL / INSTALLATION , .
    Fig 1: Locating Valve Spring Compressor SST
    G04929643Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Mark each camshaft roller follower to ensure its original position during reassembly.
  3. Using the valve spring compressor SST  , remove the camshaft roller followers.
    NOTE:
    • Lubricate the parts with clean engine oil prior to installing.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals