LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Automatic Transmission - Diagnosis - 5R44E & 5R55E) >> Removal & Installation >> Pcm >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2003 Mazda B4000, 2003 Mazda B3000, 2003 Mazda B2300, 2002 Mazda B4000, and 2002 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Locate PCM. See COMPONENT LOCATIONS . Loosen nut and disconnect PCM harness connector. Remove 2 PCM cover nuts and cover. Remove PCM. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS. Connect negative battery cable.

scientia non olet · About LEMON Manuals