Symptom Troubleshooting Chart - Safety Belt System

SYMPTOM TROUBLESHOOTING CHART - SAFETY BELT SYSTEM

Problem	Possible Cause	Action
The safety belt warning indicator lamp does not operate, the safety belt warning chime is OK	Burned-out bulb Circuitry Instrument cluster module Smart junction box (SJB)	See INSTRUMENT CLUSTER , .
Neither the safety belt warning chime nor the safety belt warning indicator lamp operates	Safety belt switch Instrument cluster module Smart junction box (SJB) Circuitry	See INSTRUMENT CLUSTER , .
Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract	Front safety belt retractor and tongue Rear safety belt retractor and tongue	Carry out the component Functional Test in this section. Install a new retractor if necessary. See SAFETY BELT RETRACTOR - FRONT 2-DOOR, REGULAR CAB , , SAFETY BELT RETRACTOR - FRONT 4-DOOR, CAB PLUS , or SAFETY BELT - REAR .