LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B2300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 553 (Cooling System) >> Fan Shroud Removal / Installation - 4.0L

Fan Shroud Removal / Installation - 4.0L

WARNING: This page is about a different car, the 2007 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet tube.
  2. Using the fan pulley holding wrench SST  and the fan clutch nut wrench SST  , remove the fan blade.
    Fig 1: Removing Fan Blade
    G04307912Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolts.
    Fig 2: Bolts With Torque Specifications
    G04307913Courtesy of MAZDA MOTORS CORP.
  4. Lift the fan shroud out of the lower retaining clips.
    Fig 3: Lifting Fan Shroud Out Of Lower Retaining Clips
    G04307914Courtesy of MAZDA MOTORS CORP.
  5. Lift the fan shroud and the fan blade and clutch assembly together from the vehicle.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals