LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B2300 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Sensors and Switches - Fuel Delivery and Air Induction >> Throttle Position Sensor >> Service and Repair

Throttle Position Sensor: Service and Repair

THROTTLE POSITION (TP) SENSOR REMOVAL / INSTALLATION - 2.3L











1. Disconnect the negative battery cable. See BATTERY DISCONNECT.
2. Remove the accelerator control splash shield.




3. Disconnect the throttle position (TP) sensor electrical connector.




4. Disconnect the throttle position (TP) sensor electrical connector.
5. Remove the bolts and the TP sensor.
6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals