LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 V6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Testing and Inspection

Drive Belt Tensioner: Testing and Inspection

DRIVE BELT AUTO TENSIONER INSPECTION [AJ]
Front Drive Belt Auto Tensioner
1. Remove the front drive belt.





2. Verify that the front drive belt auto tensioner moves smoothly in the operational direction.
^ Replace the front drive belt auto tensioner if necessary.
3. Turn the front drive belt auto tensioner pulley and verify that it rotates smoothly.
^ Replace the front drive belt auto tensioner if necessary.





4. Install the front drive belt.
scientia non olet · About LEMON Manuals