LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Testing and Inspection

Drive Belt Tensioner: Testing and Inspection

DRIVE BELT AUTO TENSIONER INSPECTION [L3]
1. Remove the drive belt.





2. Verify that the drive belt auto tensioner moves smoothly in the operational direction. Replace the drive belt auto tensioner if necessary.
3. Turn the drive belt auto tensioner pulley by hand and verify that it rotates smoothly. Replace the drive belt auto tensioner if necessary.
4. Install the drive belt.
scientia non olet · About LEMON Manuals