LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 5 L4-2.3L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair

Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION




1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the under cover.
4. Drain the oil. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)
5. Disconnect the back-up light switch connector and remove the back-up light switch.
6. Install in the reverse order of removal.
7. Refill the oil. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)
scientia non olet · About LEMON Manuals