LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 5 L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Testing and Inspection

Drive Belt Tensioner: Testing and Inspection

DRIVE BELT AUTO TENSIONER INSPECTION [L3]

1. Remove the drive belt.





2. Verify that the generator drive belt auto tensioner moves smoothly in the operational direction. If it does not move smoothly, replace the generator drive belt auto tensioner.
3. Turn the generator drive belt auto tensioner pulley by hand and verify that it rotates smoothly. If it does not move smoothly, replace the generator drive belt auto tensioner.
4. Install the generator drive belt.
scientia non olet · About LEMON Manuals