Rear Suspension

WHEEL BEARING AND WHEEL HUB

WHEEL BEARING AND WHEEL HUB:

WHEEL BEARING AND WHEEL HUB:

Removal 4WD vehicles
1. Remove the wheel knuckle.

FWD vehicles





2. Remove and discard the wheel hub nut.
3. Remove the ABS wheel speed sensor ring.

All vehicles





4. Using the special tools, remove the wheel hut).





Note: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle after removing the wheel hub.

5. Using the special tool, press the inner wheel bearing race from the wheel hub.
6. Remove the wheel bearing snap ring from the wheel knuckle.

FWD vehicles





7. Using the special tools, remove the wheel bearing from the wheel knuckle.

4WD vehicles





8. Using the special tools, press the wheel bearing race from the wheel knuckle.

Installation
All vehicles





1. Using the special tools, install a new wheel bearing into the wheel knuckle.
2. Install the wheel bearing snap ring.





3. Using the special tools, install the wheel hub into the wheel bearing.

FWD vehicles
4. Install the ABS wheel speed sensor ring.





5. Install the wheel hub nut.

4WD vehicles
6. Install the wheel knuckle.