LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Headlamp Alignment Sensor >> Service and Repair >> Rear Auto Leveling Sensor

Rear Auto Leveling Sensor

REAR AUTO LEVELING SENSOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Jack up the vehicle and remove the wheel and tire.




3. Disconnect the connector.
4. Remove the bolts and nut, then remove the rear auto leveling sensor.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals