LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair

Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Disconnect the back-up light switch connector and remove the back-up light switch.
3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals