LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> On-Board Diagnostic [Instrumentation/Driver Info) >> DTC Inspection [Instrument Cluster] >> WDS

DTC Inspection [Instrument Cluster]: WDS

  1. Connect the WDS or equivalent to the DLC-2.
  2. Verify if any DTCs are displayed.
    • If any DTCs are displayed, perform the troubleshooting according to the corresponding DTC inspection.
  3. Disconnect the WDS or equivalent.
Fig 1: Locating DLC-2 Connector
G04317682Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals