Cooling Fan And Clutch Removal / Installation - 3.0L

WARNING: This page is about a different car, the 2006 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Cooling Fan And Clutch With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

Remove the fan shroud. See FAN SHROUD REMOVAL / INSTALLATION - 3.0L .
Remove the bolts.

Fig 2: Removing/Installing Bolts With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Separate the fan blade from the fan clutch.

Fig 3: Separating Fan Blade From Fan Clutch
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.