LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 613 (Engine Mechanical [Service Information 3.0L]) >> Drive Belt Removal Installation - 3.0L

Drive Belt Removal Installation - 3.0L

WARNING: This page is about a different car, the 2006 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.
  2. To install, reverse the removal procedure. See DRIVE BELT INSPECTION - 3.0L  for correct accessory drive belt routing.
scientia non olet · About LEMON Manuals