Symptom Troubleshooting Chart - Reversing Lamps
SYMPTOM TROUBLESHOOTING CHART - REVERSING LAMPS
| Problem |
Possible Cause |
Action |
| The reversing lamps are inoperative |
- Fuse
- Circuitry
- Digital transaxle range (TR) sensor
- Reversing lamp switch
- Smart junction box (SJB)
|
|
| The individual reversing lamp is inoperative |
|
- Measure the resistance between the LH reversing lamp 0918-601 pin 1, circuit (B) harness side and ground; or between the RH reversing lamp 0918-602 pin 1, circuit (B) harness side and ground.
- If the resistance is less than 5 ohms, repair circuit (B/P). Test the system for normal operation.
- If the resistance is not less than 5 ohms, repair circuit (B). Test the system for normal operation.
|
| The reversing lamps are on continuously |
- Circuitry
- Digital TR sensor
- Reversing lamp switch
|
|