LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul >> Camshaft Inspection >> Camshaft RUNOUT

Camshaft RUNOUT

NOTE:
  • Camshaft journals must be within specifications before checking runout.
  1. Using Dial Indicator with Bracketry SST 100-002 or equivalent, measure the camshaft runout.
    1. Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
    2. For additional information, refer to CAMSHAFT SPECIFICATIONS .
    3. If out of specification, install new components as necessary. Refer to ENGINE DISASSEMBLY/ASSEMBLY .
    Fig 1: Measuring Camshaft Runout
    G02821360Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals