LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul >> Camshaft Inspection >> Camshaft Lobe Surface

Camshaft Lobe Surface

  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
    Fig 1: Inspecting Camshaft Lobes
    G02821357Courtesy of MAZDA MOTORS CORP.
    1. If excessive pitting or damage is present, install new components as necessary. Refer to ENGINE DISASSEMBLY/ASSEMBLY .
scientia non olet · About LEMON Manuals