LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical [Service Information 4.0L] >> Crankshaft - End Play

Crankshaft - End Play

  1. Measure the crankshaft end play. Use a dial indicator gauge with holding fixture to measure crankshaft end play.
  2. Position the crankshaft to the rear of the cylinder block.
  3. Zero the indicator.
    Fig 1: Measuring Crankshaft End Play Using Dial Indicator Gauge
    G04307498Courtesy of MAZDA MOTORS CORP.
  4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play. See ENGINE SPECIFICATIONS - 4.0L .
    • If crankshaft end play exceeds specifications, install a new engine short block.
scientia non olet · About LEMON Manuals