LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panels >> Rear Bumper - Hitch Plate >> Removal and Installation

Removal and Installation

  1. Remove the rear bumper beam. See REAR BUMPER - BEAM  .
  2. Remove the rear bumper beam step cover.
    • Disconnect the step cover from the rear bumper beam.
  3. Remove the 2 hitch plate mounting bolts from the top of the rear bumper.
  4. Remove the 2 hitch plate mounting bolts from the bottom of the hitch plate and remove the rear bumper hitch plate.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals