LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panels >> Drilling Precautions

Drilling Precautions

Fig 1: Identifying Drilling Precautions
G04310207Courtesy of MAZDA MOTORS CORP.
  1. If a hole must be drilled in the frame, make sure the hole meets the following requirements:
    • The hole is at least the specified distance from the edge of the nearest hole.
    • The edge of the drilled hole is at least the specified distance from the edge of the flange.
    • The hole is at least the specified distance above the frame centerline.
    • The drilled hole is at least the specified distance from any other existing bracket or component of the frame.
scientia non olet · About LEMON Manuals