LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2006
>>
B4000 Base, Automatic
>>
Repair and Diagnosis (Single Page)
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Instrumentation/Driver Info
>>
Horn
>>
Removal and Installation
Removal and Installation
Disconnect the electrical connector.
Remove the bolt and the horn.
To install, tighten to 13 N-m (1.3 kgf-m, 10 ft-lbf).
To install, reverse the removal procedure.